Through these specified maintenance, it is possible to timely find out whether the coking generator unit has faults such as abnormal sound, abnormal action, abnormal appearance, abnormal temperature, abnormal pressure and abnormal smell, so as to timely check and adjust the unit, and then solve the problems in a targeted way to ensure that the coking generator is operating in a state. Let's talk about it in detail.
Maintenance of the generator is usually a critical component. Each machine needs maintenance to increase its life cycle. In some cases, most generators require a simple visual inspection every month. Others are specific steps that require maintenance every two years. And some generators need to be maintained in a range of two to one years.
Improve maintenance tools and equipment to improve maintenance efficiency. Coking generator adopts mechanical internal mixing mode. Open the gas valve regularly to inject combustible gas into the cylinder, so that the gas and air are mixed in the cylinder for combustion. In this way, the gas passing through the supercharger and intake pipe is always non combustible pure air, avoiding the problem of backfire.
However, due to the frequent occurrence of deflagration, the piston, cylinder, intake and exhaust valves, intake and exhaust valve seats and other faults of the unit are frequent, the service life is reduced, and the amount of maintenance is considerable. In order to install conveniently and quickly, a taper sleeve is processed using the scrapped cylinder liner (the inner and outer diameters of the taper sleeve are basically the same as the original dimensions of the cylinder liner, only a section of taper surface is processed at the top, and a large fillet is poured at the junction of the taper surface and the inner hole, so that the piston ring can be pressed into the taper sleeve smoothly.
Before installing the piston to the cylinder, put the taper sleeve on the piston ring, so that all piston rings are in the compression state in normal use. During installation, just put the piston skirt in the cylinder, and then make a slight adjustment to make the cylinder and taper sleeve concentric, and then gently push the piston into the cylinder with your hands. This not only reduces the labor intensity, but also improves the installation efficiency.
What should we do to ensure that the coking generator is running in the state? The above is the answer to the question. If you have some ideas about it, please come to our website http://www.digiscrappin.com Share and communicate.